Anyone want to buy the parts for a see-me-cnc h1? Its a mendel-like
reprap, built using injection moulded parts, so super accurate!
The kit to build the printer (everything but the control board) is only
£170, and that seems to include shipping!
http://shop.seemecnc.com/H-1-Parts-Hardware-Stepper-Motors-71597.htm
A ramps kit would cost about another 70, so for £240 we’d have a nice 3d
printer for the lab.
I’m willing to put in £40 and an arduino mega towards getting one, anyone
else in?
-Bob
Anyone want to buy the parts for a see-me-cnc h1? Its a mendel-like
reprap, built using injection moulded parts, so super accurate!
The kit to build the printer (everything but the control board) is only
�170, and that seems to include shipping!
http://shop.seemecnc.com/H-1-Parts-Hardware-Stepper-Motors-71597.htm
A ramps kit would cost about another 70, so for �240 we’d have a nice 3d
printer for the lab.
I’m willing to put in �40 and an arduino mega towards getting one,
anyone else in?
I would be interested, subject to being paid this week. I will
have a look over the design and see what could be improved.
Ben Dooks bjdooks@googlemail.com http://www.fluff.org/ben/
I too will contribute…have been wanting to do something like this
for some time…however I would also like to mull over the design.
Most rep-raps are mechanically unsound and not thought out well
enough. Those that are well done cost a fortune which I suppose is as
it should be.
This is also subject to being paid this week!!
Alex
P.S Don’t suppose you are doing a farnell or Rapid order again are
you Ben? After last nights fireworks I’m in need of a few parts…On 29 March 2012 12:28, Ben Dooks bjdooks@googlemail.com wrote:
On 03/29/2012 12:19 PM, Bob Clough wrote:
Anyone want to buy the parts for a see-me-cnc h1? Its a mendel-like
reprap, built using injection moulded parts, so super accurate!
The kit to build the printer (everything but the control board) is only
£170, and that seems to include shipping!
http://shop.seemecnc.com/H-1-Parts-Hardware-Stepper-Motors-71597.htm
A ramps kit would cost about another 70, so for £240 we’d have a nice 3d
printer for the lab.
I’m willing to put in £40 and an arduino mega towards getting one,
anyone else in?
I would be interested, subject to being paid this week. I will
have a look over the design and see what could be improved.
–
Ben Dooks bjdooks@googlemail.com http://www.fluff.org/ben/
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
You can count me in for some 40 quid sounds reasonable…
although see attached 
(thats my excuse for this weeks no show)
BazOn Thu, Mar 29, 2012 at 12:47 PM, Alexander Lang < alexanderlang1980@googlemail.com> wrote:
I too will contribute…have been wanting to do something like this
for some time…however I would also like to mull over the design.
Most rep-raps are mechanically unsound and not thought out well
enough. Those that are well done cost a fortune which I suppose is as
it should be.
This is also subject to being paid this week!!
Alex
P.S Don’t suppose you are doing a farnell or Rapid order again are
you Ben? After last nights fireworks I’m in need of a few parts…
On 29 March 2012 12:28, Ben Dooks bjdooks@googlemail.com wrote:
On 03/29/2012 12:19 PM, Bob Clough wrote:
Anyone want to buy the parts for a see-me-cnc h1? Its a mendel-like
reprap, built using injection moulded parts, so super accurate!
The kit to build the printer (everything but the control board) is only
£170, and that seems to include shipping!
http://shop.seemecnc.com/H-1-Parts-Hardware-Stepper-Motors-71597.htm
A ramps kit would cost about another 70, so for £240 we’d have a nice 3d
printer for the lab.
I’m willing to put in £40 and an arduino mega towards getting one,
anyone else in?
I would be interested, subject to being paid this week. I will
have a look over the design and see what could be improved.
–
Ben Dooks bjdooks@googlemail.com http://www.fluff.org/ben/
–
You received this message because you are subscribed to the Google Groups
“HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
“HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
Smug Get!!!
You missed my fire works!!
Well Done on completed the build though!
AlexOn 29 March 2012 13:40, Barry Carter barry.carter@gmail.com wrote:
You can count me in for some 40 quid sounds reasonable…
although see attached 
(thats my excuse for this weeks no show)
Baz
On Thu, Mar 29, 2012 at 12:47 PM, Alexander Lang alexanderlang1980@googlemail.com wrote:
I too will contribute…have been wanting to do something like this
for some time…however I would also like to mull over the design.
Most rep-raps are mechanically unsound and not thought out well
enough. Those that are well done cost a fortune which I suppose is as
it should be.
This is also subject to being paid this week!!
Alex
P.S Don’t suppose you are doing a farnell or Rapid order again are
you Ben? After last nights fireworks I’m in need of a few parts…
On 29 March 2012 12:28, Ben Dooks bjdooks@googlemail.com wrote:
On 03/29/2012 12:19 PM, Bob Clough wrote:
Anyone want to buy the parts for a see-me-cnc h1? Its a mendel-like
reprap, built using injection moulded parts, so super accurate!
The kit to build the printer (everything but the control board) is only
£170, and that seems to include shipping!
http://shop.seemecnc.com/H-1-Parts-Hardware-Stepper-Motors-71597.htm
A ramps kit would cost about another 70, so for £240 we’d have a nice
3d
printer for the lab.
I’m willing to put in £40 and an arduino mega towards getting one,
anyone else in?
I would be interested, subject to being paid this week. I will
have a look over the design and see what could be improved.
–
Ben Dooks bjdooks@googlemail.com http://www.fluff.org/ben/
–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
Nice! is it printing yet?On 29 March 2012 13:40, Barry Carter barry.carter@gmail.com wrote:
You can count me in for some 40 quid sounds reasonable…
although see attached (thats my excuse for this weeks no show)
Baz
On Thu, Mar 29, 2012 at 12:47 PM, Alexander Lang < alexanderlang1980@googlemail.com> wrote:
I too will contribute…have been wanting to do something like this
for some time…however I would also like to mull over the design.
Most rep-raps are mechanically unsound and not thought out well
enough. Those that are well done cost a fortune which I suppose is as
it should be.
This is also subject to being paid this week!!
Alex
P.S Don’t suppose you are doing a farnell or Rapid order again are
you Ben? After last nights fireworks I’m in need of a few parts…
On 29 March 2012 12:28, Ben Dooks bjdooks@googlemail.com wrote:
On 03/29/2012 12:19 PM, Bob Clough wrote:
Anyone want to buy the parts for a see-me-cnc h1? Its a mendel-like
reprap, built using injection moulded parts, so super accurate!
The kit to build the printer (everything but the control board) is only
£170, and that seems to include shipping!
http://shop.seemecnc.com/H-1-Parts-Hardware-Stepper-Motors-71597.htm
A ramps kit would cost about another 70, so for £240 we’d have a nice
3d
printer for the lab.
I’m willing to put in £40 and an arduino mega towards getting one,
anyone else in?
I would be interested, subject to being paid this week. I will
have a look over the design and see what could be improved.
–
Ben Dooks bjdooks@googlemail.com http://www.fluff.org/ben/
–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
Not yet, hopefully tonight assuming no fireworks of my own!On Thu, Mar 29, 2012 at 1:41 PM, Bob Clough parag0n@ivixor.net wrote:
Nice! is it printing yet?
On 29 March 2012 13:40, Barry Carter barry.carter@gmail.com wrote:
You can count me in for some 40 quid sounds reasonable…
although see attached (thats my excuse for this weeks no show)
Baz
On Thu, Mar 29, 2012 at 12:47 PM, Alexander Lang < alexanderlang1980@googlemail.com> wrote:
I too will contribute…have been wanting to do something like this
for some time…however I would also like to mull over the design.
Most rep-raps are mechanically unsound and not thought out well
enough. Those that are well done cost a fortune which I suppose is as
it should be.
This is also subject to being paid this week!!
Alex
P.S Don’t suppose you are doing a farnell or Rapid order again are
you Ben? After last nights fireworks I’m in need of a few parts…
On 29 March 2012 12:28, Ben Dooks bjdooks@googlemail.com wrote:
On 03/29/2012 12:19 PM, Bob Clough wrote:
Anyone want to buy the parts for a see-me-cnc h1? Its a mendel-like
reprap, built using injection moulded parts, so super accurate!
The kit to build the printer (everything but the control board) is
only
£170, and that seems to include shipping!
http://shop.seemecnc.com/H-1-Parts-Hardware-Stepper-Motors-71597.htm
A ramps kit would cost about another 70, so for £240 we’d have a nice
3d
printer for the lab.
I’m willing to put in £40 and an arduino mega towards getting one,
anyone else in?
I would be interested, subject to being paid this week. I will
have a look over the design and see what could be improved.
–
Ben Dooks bjdooks@googlemail.com http://www.fluff.org/ben/
–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google
Groups “HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
Hopefully there won’t be any fireworks…now does anyone know an easy
way to travel back in time and do things differently (less
expensively)…actually sod it…does anyone know how to get things
right first time every time! I’m in the market for engineering
solutions!
AlexOn 29 March 2012 13:43, Barry Carter barry.carter@gmail.com wrote:
Not yet, hopefully tonight assuming no fireworks of my own!
On Thu, Mar 29, 2012 at 1:41 PM, Bob Clough parag0n@ivixor.net wrote:
Nice! is it printing yet?
On 29 March 2012 13:40, Barry Carter barry.carter@gmail.com wrote:
You can count me in for some 40 quid sounds reasonable…
although see attached (thats my excuse for this weeks no show)
Baz
On Thu, Mar 29, 2012 at 12:47 PM, Alexander Lang alexanderlang1980@googlemail.com wrote:
I too will contribute…have been wanting to do something like this
for some time…however I would also like to mull over the design.
Most rep-raps are mechanically unsound and not thought out well
enough. Those that are well done cost a fortune which I suppose is as
it should be.
This is also subject to being paid this week!!
Alex
P.S Don’t suppose you are doing a farnell or Rapid order again are
you Ben? After last nights fireworks I’m in need of a few parts…
On 29 March 2012 12:28, Ben Dooks bjdooks@googlemail.com wrote:
On 03/29/2012 12:19 PM, Bob Clough wrote:
Anyone want to buy the parts for a see-me-cnc h1? Its a mendel-like
reprap, built using injection moulded parts, so super accurate!
The kit to build the printer (everything but the control board) is
only
£170, and that seems to include shipping!
http://shop.seemecnc.com/H-1-Parts-Hardware-Stepper-Motors-71597.htm
A ramps kit would cost about another 70, so for £240 we’d have a nice
3d
printer for the lab.
I’m willing to put in £40 and an arduino mega towards getting one,
anyone else in?
I would be interested, subject to being paid this week. I will
have a look over the design and see what could be improved.
–
Ben Dooks bjdooks@googlemail.com http://www.fluff.org/ben/
–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google
Groups “HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
Easy, get some other bigger to make all the mistakes first 
Hopefully there won’t be any fireworks…now does anyone know an easy
way to travel back in time and do things differently (less
expensively)…actually sod it…does anyone know how to get things
right first time every time! I’m in the market for engineering
solutions!
AlexOn 29 March 2012 13:43, Barry Carter barry.carter@gmail.com wrote:
Not yet, hopefully tonight a…
Heh…true dat!On 29 March 2012 14:10, Tom Bloor tom.bloor@googlemail.com wrote:
Easy, get some other bigger to make all the mistakes first
On 29 Mar 2012 13:52, “Alexander Lang” alexanderlang1980@googlemail.com wrote:
Hopefully there won’t be any fireworks…now does anyone know an easy
way to travel back in time and do things differently (less
expensively)…actually sod it…does anyone know how to get things
right first time every time! I’m in the market for engineering
solutions!
Alex
On 29 March 2012 13:43, Barry Carter barry.carter@gmail.com wrote:
Not yet, hopefully tonight a…
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
http://wiki.hacman.org.uk/SeeMeCNC_H1_pledge created a wiki page for the
pledge drive
Ben, Alex - how much do you want to pledge?On 29 March 2012 14:11, Alexander Lang alexanderlang1980@googlemail.comwrote:
Heh…true dat!
On 29 March 2012 14:10, Tom Bloor tom.bloor@googlemail.com wrote:
Easy, get some other bigger to make all the mistakes first
On 29 Mar 2012 13:52, “Alexander Lang” <alexanderlang1980@googlemail.com wrote:
Hopefully there won’t be any fireworks…now does anyone know an easy
way to travel back in time and do things differently (less
expensively)…actually sod it…does anyone know how to get things
right first time every time! I’m in the market for engineering
solutions!
Alex
On 29 March 2012 13:43, Barry Carter barry.carter@gmail.com wrote:
Not yet, hopefully tonight a…
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
Bob,
I will pledge £40
Regards
AlexOn 30 March 2012 09:16, Bob Clough parag0n@ivixor.net wrote:
http://wiki.hacman.org.uk/SeeMeCNC_H1_pledge created a wiki page for the
pledge drive
Ben, Alex - how much do you want to pledge?
On 29 March 2012 14:11, Alexander Lang alexanderlang1980@googlemail.com wrote:
Heh…true dat!
On 29 March 2012 14:10, Tom Bloor tom.bloor@googlemail.com wrote:
Easy, get some other bigger to make all the mistakes first
On 29 Mar 2012 13:52, “Alexander Lang” alexanderlang1980@googlemail.com wrote:
Hopefully there won’t be any fireworks…now does anyone know an easy
way to travel back in time and do things differently (less
expensively)…actually sod it…does anyone know how to get things
right first time every time! I’m in the market for engineering
solutions!
Alex
On 29 March 2012 13:43, Barry Carter barry.carter@gmail.com wrote:
Not yet, hopefully tonight a…
–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
(thats my excuse for this weeks no show)