ABS

Google Groups
1

hello.

I need some 3mm ABS… Anyone have any suggestions of where to order from?
(faberdashery only do PLA as far as I can tell)

Does anyone need anything when I do order some?

Cheers

Baz

2

From #reprap IRC:

filament?
filament is http://reprap.org/wiki/Printing_Material_Suppliers ,
http://www.3ders.org/pricecompare/ Recommended Suppliers by Community Poll:
*US: ultimachine, makergear, protoparadigm *EU: faberdashery, reprapsource,
Supply3DPLA *NZ: diamondage *Asia: romscraj *AU: create3d.com.au

I’m thinking of getting a few rolls for PLA from Supply3DPLA soon if you
want any, but obviously they only sell PLA, not ABS.On 24 June 2012 00:34, Barry Carter barry.carter@gmail.com wrote:

hello.

I need some 3mm ABS… Anyone have any suggestions of where to order from?
(faberdashery only do PLA as far as I can tell)

Does anyone need anything when I do order some?

Cheers

Baz

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

3

http://www.ebay.co.uk/itm/280907922905?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

If you’re quick!On 24 June 2012 17:30, Bob Clough parag0n@ivixor.net wrote:

From #reprap IRC:

filament?
filament is http://reprap.org/wiki/Printing_Material_Suppliers ,
http://www.3ders.org/pricecompare/ Recommended Suppliers by Community
Poll: *US: ultimachine, makergear, protoparadigm *EU: faberdashery,
reprapsource, Supply3DPLA *NZ: diamondage *Asia: romscraj *AU:
create3d.com.au

I’m thinking of getting a few rolls for PLA from Supply3DPLA soon if you
want any, but obviously they only sell PLA, not ABS.

On 24 June 2012 00:34, Barry Carter barry.carter@gmail.com wrote:

hello.

I need some 3mm ABS… Anyone have any suggestions of where to order from?
(faberdashery only do PLA as far as I can tell)

Does anyone need anything when I do order some?

Cheers

Baz

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

4

Is that a good deal?

for 5kg seems okOn Mon, Jun 25, 2012 at 1:10 PM, Bob Clough parag0n@ivixor.net wrote:

http://www.ebay.co.uk/itm/280907922905?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

If you’re quick!

On 24 June 2012 17:30, Bob Clough parag0n@ivixor.net wrote:

From #reprap IRC:

filament?
filament is http://reprap.org/wiki/Printing_Material_Suppliers ,
http://www.3ders.org/pricecompare/ Recommended Suppliers by Community
Poll: *US: ultimachine, makergear, protoparadigm *EU: faberdashery,
reprapsource, Supply3DPLA *NZ: diamondage *Asia: romscraj *AU:
create3d.com.au

I’m thinking of getting a few rolls for PLA from Supply3DPLA soon if you
want any, but obviously they only sell PLA, not ABS.

On 24 June 2012 00:34, Barry Carter barry.carter@gmail.com wrote:

hello.

I need some 3mm ABS… Anyone have any suggestions of where to order
from? (faberdashery only do PLA as far as I can tell)

Does anyone need anything when I do order some?

Cheers

Baz

–
You received this message because you are subscribed to the Google
Groups “HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

5

Its a good price for such a massive amount i think.On 25 June 2012 13:47, Barry Carter barry.carter@gmail.com wrote:

Is that a good deal?

for 5kg seems ok

On Mon, Jun 25, 2012 at 1:10 PM, Bob Clough parag0n@ivixor.net wrote:

http://www.ebay.co.uk/itm/280907922905?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

If you’re quick!

On 24 June 2012 17:30, Bob Clough parag0n@ivixor.net wrote:

From #reprap IRC:

filament?
filament is http://reprap.org/wiki/Printing_Material_Suppliers ,
http://www.3ders.org/pricecompare/ Recommended Suppliers by Community
Poll: *US: ultimachine, makergear, protoparadigm *EU: faberdashery,
reprapsource, Supply3DPLA *NZ: diamondage *Asia: romscraj *AU:
create3d.com.au

I’m thinking of getting a few rolls for PLA from Supply3DPLA soon if you
want any, but obviously they only sell PLA, not ABS.

On 24 June 2012 00:34, Barry Carter barry.carter@gmail.com wrote:

hello.

I need some 3mm ABS… Anyone have any suggestions of where to order
from? (faberdashery only do PLA as far as I can tell)

Does anyone need anything when I do order some?

Cheers

Baz

–
You received this message because you are subscribed to the Google
Groups “HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

6

Purchased. Nice one Bob!On Mon, Jun 25, 2012 at 1:52 PM, Bob Clough parag0n@ivixor.net wrote:

Its a good price for such a massive amount i think.

On 25 June 2012 13:47, Barry Carter barry.carter@gmail.com wrote:

Is that a good deal?

for 5kg seems ok

On Mon, Jun 25, 2012 at 1:10 PM, Bob Clough parag0n@ivixor.net wrote:

http://www.ebay.co.uk/itm/280907922905?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

If you’re quick!

On 24 June 2012 17:30, Bob Clough parag0n@ivixor.net wrote:

From #reprap IRC:

filament?
filament is http://reprap.org/wiki/Printing_Material_Suppliers ,
http://www.3ders.org/pricecompare/ Recommended Suppliers by Community
Poll: *US: ultimachine, makergear, protoparadigm *EU: faberdashery,
reprapsource, Supply3DPLA *NZ: diamondage *Asia: romscraj *AU:
create3d.com.au

I’m thinking of getting a few rolls for PLA from Supply3DPLA soon if
you want any, but obviously they only sell PLA, not ABS.

On 24 June 2012 00:34, Barry Carter barry.carter@gmail.com wrote:

hello.

I need some 3mm ABS… Anyone have any suggestions of where to order
from? (faberdashery only do PLA as far as I can tell)

Does anyone need anything when I do order some?

Cheers

Baz

–
You received this message because you are subscribed to the Google
Groups “HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups “HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.