I’ve been working on a weather station / thermostat for the Arduino. I
have it currently displaying temp, humidity, time/date, and
controlling a set of relays to turn on the furnace and a/c at preset
temps. I have a barometric pressure sensor that came in DOA, so I’m
waiting for a replacement. A wind speed, wind direction and rain gauge
are next. http://arduinotronics.blogspot.com
Cool!
Are you planning to hook it up to the internet, using an ethernet shield or
similar, to allow graphing and displaying of the current temperature on your
website?
-BobOn 30 October 2010 13:16, sspence greentrust@gmail.com wrote:
I’ve been working on a weather station / thermostat for the Arduino. I
have it currently displaying temp, humidity, time/date, and
controlling a set of relays to turn on the furnace and a/c at preset
temps. I have a barometric pressure sensor that came in DOA, so I’m
waiting for a replacement. A wind speed, wind direction and rain gauge
are next. http://arduinotronics.blogspot.com–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
More than likely that’s where this will go. Then I can pull down
forecasts and do comparisons with my observed vs. to historical
readings. I couls also display things like UV index that are too
expensive for me to sense. I have the mega 2560, so I have 50+ i/o pins
to play with.
Steve Spence
Renewable energy and self sufficiency
http://www.green-trust.org
http://arduinotronics.blogspot.com/On 10/31/2010 03:42 PM, Bob Clough wrote:
Cool!
Are you planning to hook it up to the internet, using an ethernet shield
or similar, to allow graphing and displaying of the current temperature
on your website?-Bob
On 30 October 2010 13:16, sspence <greentrust@gmail.com mailto:greentrust@gmail.com> wrote:
I've been working on a weather station / thermostat for the Arduino. I have it currently displaying temp, humidity, time/date, and controlling a set of relays to turn on the furnace and a/c at preset temps. I have a barometric pressure sensor that came in DOA, so I'm waiting for a replacement. A wind speed, wind direction and rain gauge are next. http://arduinotronics.blogspot.com -- You received this message because you are subscribed to the Google Groups "HACMan" group. To post to this group, send an email to hacman@googlegroups.com <mailto:hacman@googlegroups.com>. To unsubscribe from this group, send email to hacman+unsubscribe@googlegroups.com <mailto:hacman%2Bunsubscribe@googlegroups.com>. For more options, visit this group at http://groups.google.com/group/hacman?hl=en-GB.–
You received this message because you are subscribed to the Google
Groups “HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.