Free STM32 Discovery!

Google Groups
1

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

2

Good find!On 4 November 2010 21:44, Bob Clough parag0n@ivixor.net wrote:

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

3

hmmm lets see I can get one this time!!On Thu, Nov 4, 2010 at 9:44 PM, Bob Clough parag0n@ivixor.net wrote:

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

4

Woo applied, haven’t heard owt back from it yet though!On Nov 4, 9:44 pm, Bob Clough para...@ivixor.net wrote:

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

5

Just got home form DIWO at fablab, and mine was waiting for me on the mat!

Playing with getting it set up for programming on Linux now.On 11 November 2010 20:12, mattg groups@mattg.co.uk wrote:

Woo applied, haven’t heard owt back from it yet though!

On Nov 4, 9:44 pm, Bob Clough para...@ivixor.net wrote:

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

–
You received this message because you are subscribed to the Google Groups “HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to hacman+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/hacman?hl=en-GB.

6

I just got mine today too! Thanks for the info. What compiler etc are u
going to use?

Just got home form DIWO at fablab, and mine was waiting for me on the mat!

Playing with getting it set up for programming on Linux now.

Woo applied, haven’t heard owt back from it yet though!

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.

To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com hacman%2Bunsubscribe@googlegroups.com.

For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com hacman%2Bunsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

7

Probably Codesourcery’s ARM-GCC version. It looks like the debugwire
protocol used by the onboard programmer isnt linux compatible yet
though :(On 11 November 2010 22:52, Mark Dodgson mark.dodgson@googlemail.com wrote:

I just got mine today too! Thanks for the info. What compiler etc are u
going to use?

On 11 Nov 2010 22:44, “Bob Clough” parag0n@ivixor.net wrote:

Just got home form DIWO at fablab, and mine was waiting for me on the mat!

Playing with getting it set up for programming on Linux now.

On 11 November 2010 20:12, mattg groups@mattg.co.uk wrote:

Woo applied, haven’t heard owt back from it yet though!

On Nov 4, 9:44 pm, Bob Clough para...@ivixor.net wrote:

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

8

I got mine too, not sure what im going to do with it yet thoOn 11 November 2010 22:56, Bob Clough parag0n@ivixor.net wrote:

Probably Codesourcery’s ARM-GCC version. It looks like the debugwire
protocol used by the onboard programmer isnt linux compatible yet
though :frowning:

On 11 November 2010 22:52, Mark Dodgson mark.dodgson@googlemail.com wrote:

I just got mine today too! Thanks for the info. What compiler etc are u
going to use?

On 11 Nov 2010 22:44, “Bob Clough” parag0n@ivixor.net wrote:

Just got home form DIWO at fablab, and mine was waiting for me on the
mat!

Playing with getting it set up for programming on Linux now.

On 11 November 2010 20:12, mattg groups@mattg.co.uk wrote:

Woo applied, haven’t heard owt back from it yet though!

On Nov 4, 9:44 pm, Bob Clough para...@ivixor.net wrote:

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

–
You received this message because you are subscribed to the Google
Groups

“HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.

For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups

“HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.

For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

9

Just registered for mine! I’m assuming we’re only meant to submit the
actual project later.
How long did it take for your board to arrive?On Fri, Nov 12, 2010 at 9:58 AM, Dean Moore doghousedean@gmail.com wrote:

I got mine too, not sure what im going to do with it yet tho

On 11 November 2010 22:56, Bob Clough parag0n@ivixor.net wrote:

Probably Codesourcery’s ARM-GCC version. It looks like the debugwire
protocol used by the onboard programmer isnt linux compatible yet
though :frowning:

On 11 November 2010 22:52, Mark Dodgson mark.dodgson@googlemail.com wrote:

I just got mine today too! Thanks for the info. What compiler etc are u
going to use?

On 11 Nov 2010 22:44, “Bob Clough” parag0n@ivixor.net wrote:

Just got home form DIWO at fablab, and mine was waiting for me on the
mat!

Playing with getting it set up for programming on Linux now.

On 11 November 2010 20:12, mattg groups@mattg.co.uk wrote:

Woo applied, haven’t heard owt back from it yet though!

On Nov 4, 9:44 pm, Bob Clough para...@ivixor.net wrote:

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

João Pedro Forjaz de Lacerda
http://www.xvrse.com/

10

A week.

I’m thinking of shooting ST an email and asking if i can have access
to the ST-Link spec to get some software written to allow linux users
to easily flash software to the discovery, right now its a bit useless
for me!

-Bob2010/11/12 João Pedro Forjaz de Lacerda jplcrd@gmail.com:

Just registered for mine! I’m assuming we’re only meant to submit the
actual project later.
How long did it take for your board to arrive?

On Fri, Nov 12, 2010 at 9:58 AM, Dean Moore doghousedean@gmail.com wrote:

I got mine too, not sure what im going to do with it yet tho

On 11 November 2010 22:56, Bob Clough parag0n@ivixor.net wrote:

Probably Codesourcery’s ARM-GCC version. It looks like the debugwire
protocol used by the onboard programmer isnt linux compatible yet
though :frowning:

On 11 November 2010 22:52, Mark Dodgson mark.dodgson@googlemail.com wrote:

I just got mine today too! Thanks for the info. What compiler etc are u
going to use?

On 11 Nov 2010 22:44, “Bob Clough” parag0n@ivixor.net wrote:

Just got home form DIWO at fablab, and mine was waiting for me on the
mat!

Playing with getting it set up for programming on Linux now.

On 11 November 2010 20:12, mattg groups@mattg.co.uk wrote:

Woo applied, haven’t heard owt back from it yet though!

On Nov 4, 9:44 pm, Bob Clough para...@ivixor.net wrote:

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
João Pedro Forjaz de Lacerda
http://www.xvrse.com/

–
You received this message because you are subscribed to the Google Groups “HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to hacman+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/hacman?hl=en-GB.

11

That sounds like a good idea. Let me know of their response, as I will
be in the same situations as yourself (I’ll be able to give you a hand
on writing the software as well).On Fri, Nov 12, 2010 at 3:58 PM, Bob Clough parag0n@ivixor.net wrote:

A week.

I’m thinking of shooting ST an email and asking if i can have access
to the ST-Link spec to get some software written to allow linux users
to easily flash software to the discovery, right now its a bit useless
for me!

-Bob

2010/11/12 João Pedro Forjaz de Lacerda jplcrd@gmail.com:

Just registered for mine! I’m assuming we’re only meant to submit the
actual project later.
How long did it take for your board to arrive?

On Fri, Nov 12, 2010 at 9:58 AM, Dean Moore doghousedean@gmail.com wrote:

I got mine too, not sure what im going to do with it yet tho

On 11 November 2010 22:56, Bob Clough parag0n@ivixor.net wrote:

Probably Codesourcery’s ARM-GCC version. It looks like the debugwire
protocol used by the onboard programmer isnt linux compatible yet
though :frowning:

On 11 November 2010 22:52, Mark Dodgson mark.dodgson@googlemail.com wrote:

I just got mine today too! Thanks for the info. What compiler etc are u
going to use?

On 11 Nov 2010 22:44, “Bob Clough” parag0n@ivixor.net wrote:

Just got home form DIWO at fablab, and mine was waiting for me on the
mat!

Playing with getting it set up for programming on Linux now.

On 11 November 2010 20:12, mattg groups@mattg.co.uk wrote:

Woo applied, haven’t heard owt back from it yet though!

On Nov 4, 9:44 pm, Bob Clough para...@ivixor.net wrote:

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
João Pedro Forjaz de Lacerda
http://www.xvrse.com/

–
You received this message because you are subscribed to the Google Groups “HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to hacman+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups “HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to hacman+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/hacman?hl=en-GB.

João Pedro Forjaz de Lacerda
http://www.xvrse.com/

12

Hello JP!

How is the binary clock design going? I have been looking into it myself!
Its been a while but I have the start of the circuit sorted out. If you are
coming to the Hacman tomorrow night I can show you what I’ve been up to! I
must admit it is a great learning project.

Regards

Alex2010/11/12 João Pedro Forjaz de Lacerda jplcrd@gmail.com

That sounds like a good idea. Let me know of their response, as I will
be in the same situations as yourself (I’ll be able to give you a hand
on writing the software as well).

On Fri, Nov 12, 2010 at 3:58 PM, Bob Clough parag0n@ivixor.net wrote:

A week.

I’m thinking of shooting ST an email and asking if i can have access
to the ST-Link spec to get some software written to allow linux users
to easily flash software to the discovery, right now its a bit useless
for me!

-Bob

2010/11/12 João Pedro Forjaz de Lacerda jplcrd@gmail.com:

Just registered for mine! I’m assuming we’re only meant to submit the
actual project later.
How long did it take for your board to arrive?

On Fri, Nov 12, 2010 at 9:58 AM, Dean Moore doghousedean@gmail.com wrote:

I got mine too, not sure what im going to do with it yet tho

On 11 November 2010 22:56, Bob Clough parag0n@ivixor.net wrote:

Probably Codesourcery’s ARM-GCC version. It looks like the debugwire
protocol used by the onboard programmer isnt linux compatible yet
though :frowning:

On 11 November 2010 22:52, Mark Dodgson mark.dodgson@googlemail.com wrote:

I just got mine today too! Thanks for the info. What compiler etc
are u

going to use?

On 11 Nov 2010 22:44, “Bob Clough” parag0n@ivixor.net wrote:

Just got home form DIWO at fablab, and mine was waiting for me on
the

mat!

Playing with getting it set up for programming on Linux now.

On 11 November 2010 20:12, mattg groups@mattg.co.uk wrote:

Woo applied, haven’t heard owt back from it yet though!

On Nov 4, 9:44 pm, Bob Clough para...@ivixor.net wrote:

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.

For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.

For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.

For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups

“HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.

For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups

“HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.

For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
João Pedro Forjaz de Lacerda
http://www.xvrse.com/

–
You received this message because you are subscribed to the Google
Groups “HACMan” group.

To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.

For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
João Pedro Forjaz de Lacerda
http://www.xvrse.com/

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.comhacman%2Bunsubscribe@googlegroups.com
.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

13

Hey there!

I’ve been thinking about it (ever so slightly), and identified a few
problems with our initial design. I will definitely be showing up
tomorrow, looking forward to seeing you there!

Kind regards,

J.P.On Tue, Nov 16, 2010 at 8:45 PM, Alexander Lang alexanderlang1980@googlemail.com wrote:

Hello JP!

How is the binary clock design going? I have been looking into it myself!
Its been a while but I have the start of the circuit sorted out. If you are
coming to the Hacman tomorrow night I can show you what I’ve been up to! I
must admit it is a great learning project.

Regards

Alex

2010/11/12 João Pedro Forjaz de Lacerda jplcrd@gmail.com

That sounds like a good idea. Let me know of their response, as I will
be in the same situations as yourself (I’ll be able to give you a hand
on writing the software as well).

On Fri, Nov 12, 2010 at 3:58 PM, Bob Clough parag0n@ivixor.net wrote:

A week.

I’m thinking of shooting ST an email and asking if i can have access
to the ST-Link spec to get some software written to allow linux users
to easily flash software to the discovery, right now its a bit useless
for me!

-Bob

2010/11/12 João Pedro Forjaz de Lacerda jplcrd@gmail.com:

Just registered for mine! I’m assuming we’re only meant to submit the
actual project later.
How long did it take for your board to arrive?

On Fri, Nov 12, 2010 at 9:58 AM, Dean Moore doghousedean@gmail.com wrote:

I got mine too, not sure what im going to do with it yet tho

On 11 November 2010 22:56, Bob Clough parag0n@ivixor.net wrote:

Probably Codesourcery’s ARM-GCC version. It looks like the debugwire
protocol used by the onboard programmer isnt linux compatible yet
though :frowning:

On 11 November 2010 22:52, Mark Dodgson mark.dodgson@googlemail.com wrote:

I just got mine today too! Thanks for the info. What compiler etc
are u
going to use?

On 11 Nov 2010 22:44, “Bob Clough” parag0n@ivixor.net wrote:

Just got home form DIWO at fablab, and mine was waiting for me on
the
mat!

Playing with getting it set up for programming on Linux now.

On 11 November 2010 20:12, mattg groups@mattg.co.uk wrote:

Woo applied, haven’t heard owt back from it yet though!

On Nov 4, 9:44 pm, Bob Clough para...@ivixor.net wrote:

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be good.

–
You received this message because you are subscribed to the
Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
João Pedro Forjaz de Lacerda
http://www.xvrse.com/

–
You received this message because you are subscribed to the Google
Groups “HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups “HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
João Pedro Forjaz de Lacerda
http://www.xvrse.com/

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

João Pedro Forjaz de Lacerda
http://www.xvrse.com/
http://www2.cs.man.ac.uk/~lacerdj0/

14

Hi, I got a STM32 Discovery too. But got no clue with it to be honest.
If you already know how to flash stuff to it from Linux let me know!

Cheers,
Enric

Hey there!

I’ve been thinking about it (ever so slightly), and identified a few
problems with our initial design. I will definitely be showing up
tomorrow, looking forward to seeing you there!

Kind regards,

J.P.

Hello JP!

How is the binary clock design going? I have been looking into it
myself!
Its been a while but I have the start of the circuit sorted out. If
you

are
coming to the Hacman tomorrow night I can show you what I’ve been up
to! I
must admit it is a great learning project.

Regards

Alex

That sounds like a good idea. Let me know of their response, as I will
be in the same situations as yourself (I’ll be able to give you a hand
on writing the software as well).

A week.

I’m thinking of shooting ST an email and asking if i can have access
to the ST-Link spec to get some software written to allow linux
users

to easily flash software to the discovery, right now its a bit
useless

for me!

-Bob

Just registered for mine! I’m assuming we’re only meant to submit
the

actual project later.
How long did it take for your board to arrive?

I got mine too, not sure what im going to do with it yet tho

Probably Codesourcery’s ARM-GCC version. It looks like the
debugwire
protocol used by the onboard programmer isnt linux compatible yet
though :frowning:

I just got mine today too! Thanks for the info. What compiler
etc

are u
going to use?

Just got home form DIWO at fablab, and mine was waiting for me
on
the
mat!

Playing with getting it set up for programming on Linux now.

Woo applied, haven’t heard owt back from it yet though!

http://www.ebv.com/en/products/stm32-design-contest.html

Free board when you sign up to the competition, gotta be
good.

–
You received this message because you are subscribed to the
Google
Groups
"HACMan" group.
To post to this group, send an email to
hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the
Google
Groups
"HACMan" group.
To post to this group, send an email to
hacman@googlegroups.com.

To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the
Google
Groups
"HACMan" group.
To post to this group, send an email to
hacman@googlegroups.com.

To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the
Google

Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
João Pedro Forjaz de Lacerda
http://www.xvrse.com/

–
You received this message because you are subscribed to the Google
Groups “HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups “HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
João Pedro Forjaz de Lacerda
http://www.xvrse.com/

–
You received this message because you are subscribed to the Google
Groups
"HACMan" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups

“HACMan” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
João Pedro Forjaz de Lacerda
http://www.xvrse.com/
http://www2.cs.man.ac.uk/~lacerdj0/

Save paper, don’t print this email. */ Recycle, up-cycle, create!
Please support us on our swimming challenge through the English Channel.