Hi guys/gals,
I visited hacman just before the move to the new space with my pal Aaron
Donnelly(friend of Bob) and had intended to join up.
other things came up and i had to put my project off for a few months, but
now I’m up and running and need more than a little advice.
I’m building an environmental controller based on the Raspberry pi, things
are going well but i new need to build a circuit that is way out of my
technical range.
the datasheet I’m looking at is on
Is there anyone who could give me some advice on this? would it be ok for
me to pop by on Wednesday to discus this with someone?
best regards,
Keg
Hi Kevin.
I will have a look at the datasheet and see what is going on. It is always
better to meet up though and Wednesday is the night for doing that. If you
can come down to the space and we can chat then.
Cheers
AlexOn 23 Jul 2013 08:56, “Kevin Conroy” kconroy188@googlemail.com wrote:
Hi guys/gals,
I visited hacman just before the move to the new space with my pal Aaron
Donnelly(friend of Bob) and had intended to join up.
other things came up and i had to put my project off for a few months, but
now I’m up and running and need more than a little advice.
I’m building an environmental controller based on the Raspberry pi, things
are going well but i new need to build a circuit that is way out of my
technical range.
the datasheet I’m looking at is on
http://cache.freescale.com/files/microcontrollers/doc/ref_manual/DRM039.pdf?fpsp=1
Is there anyone who could give me some advice on this? would it be ok for
me to pop by on Wednesday to discus this with someone?
best regards,
Keg
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman.
For more options, visit https://groups.google.com/groups/opt_out.