Laser Cutter out of Order

Google Groups
1

Hi All,

Tried to use the laser last night but it wasn’t cutting right.

I’ve put it out of order until I have time to look at it, will probably be
Sunday at the earliest. This coincides with its monthly tuneup and clean
anyway.

Ta,
Bob

2

Laser is now up and running again.

I’ve rebuilt the honeycomb bed, so it should now be flat again (yay!).
Please don’t push down on it too hard.

When people have cut wood and card on it, please remember to vacuum
off the bed so the flammable dust on the bed doesn’t set on fire when
the next person is using it!On 31 October 2013 09:33, Bob Clough parag0n@ivixor.net wrote:

Hi All,

Tried to use the laser last night but it wasn’t cutting right.

I’ve put it out of order until I have time to look at it, will probably be
Sunday at the earliest. This coincides with its monthly tuneup and clean
anyway.

Ta,
Bob

3

Cool…nice one Bob!On 3 Nov 2013 19:20, “Bob Clough” parag0n@ivixor.net wrote:

Laser is now up and running again.

I’ve rebuilt the honeycomb bed, so it should now be flat again (yay!).
Please don’t push down on it too hard.

When people have cut wood and card on it, please remember to vacuum
off the bed so the flammable dust on the bed doesn’t set on fire when
the next person is using it!

On 31 October 2013 09:33, Bob Clough parag0n@ivixor.net wrote:

Hi All,

Tried to use the laser last night but it wasn’t cutting right.

I’ve put it out of order until I have time to look at it, will probably
be
Sunday at the earliest. This coincides with its monthly tuneup and clean
anyway.

Ta,
Bob

–
You received this message because you are subscribed to the Google Groups
"Hackspace Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman.
For more options, visit https://groups.google.com/groups/opt_out.