Hi All.
Just an update on the new Laster Cutter.
It has been ordered and will arrive in a couple of months time (the
local UK distributor needed more stock from China). When it arrives
there is a bunch of work that will need to be done to it before it’s
ready, but Bob will keep you updated on that.
Thanks to everyone who has already paid their pledges, there is a few
that haven’t yet - please can you do so asap so we have the cash to
buy all the associated parts for the stretch goals.
Just a quick note to clear up some confusion with the Pledge/Laser
time deal. The current Laser cutter does not belong to HacMan, but to
Gobotics Limited, and all the money for the usage goes to Gobotics,
this means that the laster time you get from your pledge can only be
used for the new cutter, not the existing cutter.
Thanks all, and thanks for the generous pledging that has allowed us
to get a great new piece of equipment.
Kimball, your friendly Treasurer.
For those of us with time left on the existing laser cutter then, this
excess time wont transfer to the new one?On Friday, 6 March 2015 11:24:01 UTC, Kimball Johnson wrote:
Hi All.
Just an update on the new Laster Cutter.
It has been ordered and will arrive in a couple of months time (the
local UK distributor needed more stock from China). When it arrives
there is a bunch of work that will need to be done to it before it’s
ready, but Bob will keep you updated on that.
Thanks to everyone who has already paid their pledges, there is a few
that haven’t yet - please can you do so asap so we have the cash to
buy all the associated parts for the stretch goals.
Just a quick note to clear up some confusion with the Pledge/Laser
time deal. The current Laser cutter does not belong to HacMan, but to
Gobotics Limited, and all the money for the usage goes to Gobotics,
this means that the laster time you get from your pledge can only be
used for the new cutter, not the existing cutter.
Thanks all, and thanks for the generous pledging that has allowed us
to get a great new piece of equipment.
Kimball, your friendly Treasurer.
I’m going to be calling in debts for the existing blue box laser in the
next month or so, before it is removed.
I will pay back positive balances ( I think you are the only one ).On 6 March 2015 at 12:17, Nathan Hickling unfoundbug@gmail.com wrote:
For those of us with time left on the existing laser cutter then, this
excess time wont transfer to the new one?
On Friday, 6 March 2015 11:24:01 UTC, Kimball Johnson wrote:
Hi All.
Just an update on the new Laster Cutter.
It has been ordered and will arrive in a couple of months time (the
local UK distributor needed more stock from China). When it arrives
there is a bunch of work that will need to be done to it before it’s
ready, but Bob will keep you updated on that.
Thanks to everyone who has already paid their pledges, there is a few
that haven’t yet - please can you do so asap so we have the cash to
buy all the associated parts for the stretch goals.
Just a quick note to clear up some confusion with the Pledge/Laser
time deal. The current Laser cutter does not belong to HacMan, but to
Gobotics Limited, and all the money for the usage goes to Gobotics,
this means that the laster time you get from your pledge can only be
used for the new cutter, not the existing cutter.
Thanks all, and thanks for the generous pledging that has allowed us
to get a great new piece of equipment.
Kimball, your friendly Treasurer.
–
You received this message because you are subscribed to the Google Groups
"Hackspace Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.
To post to this group, send email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman.
For more options, visit https://groups.google.com/d/optout.
Oops. I forgot. Paid now.
The current laser owes me £5. Its on the board bit someone put some metal in front of it.
Boz.
So I take it that the old one isn’t being fixed before the new one arrives?
I’m just checking cause I need to make some things before end of the month and will need to arrange somewhere else to do it if this is the case.
thanks,
Boz
If anyone can’t make their pledge (for whatever reason) I’ll be happy to cover it.
Boz,
Simon’s attempts to break it again aside the existing laser should be
working. I will double check tomorrow but it was fine this morning 
T.
Bohemia Skye mailto:bohemia.skye@googlemail.com
8 March 2015 01:58
So I take it that the old one isn’t being fixed before the new one
arrives?
I’m just checking cause I need to make some things before end of the
month and will need to arrange somewhere else to do it if this is the
case.
thanks,
Boz
Bohemia Skye mailto:bohemia.skye@googlemail.com
6 March 2015 18:30
Oops. I forgot. Paid now.
The current laser owes me £5. Its on the board bit someone put some
metal in front of it.
Boz.
Bob Clough mailto:bob@clough.me
6 March 2015 12:39
I’m going to be calling in debts for the existing blue box laser in
the next month or so, before it is removed.
I will pay back positive balances ( I think you are the only one ).
–
You received this message because you are subscribed to the Google
Groups “Hackspace Manchester” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to hacman+unsubscribe@googlegroups.com
mailto:hacman+unsubscribe@googlegroups.com.
To post to this group, send email to hacman@googlegroups.com
mailto:hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman.
For more options, visit https://groups.google.com/d/optout.
Nathan Hickling mailto:unfoundbug@gmail.com
6 March 2015 12:17
For those of us with time left on the existing laser cutter then, this
excess time wont transfer to the new one?
–
You received this message because you are subscribed to the Google
Groups “Hackspace Manchester” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to hacman+unsubscribe@googlegroups.com
mailto:hacman+unsubscribe@googlegroups.com.
To post to this group, send email to hacman@googlegroups.com
mailto:hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman.
For more options, visit https://groups.google.com/d/optout.
Kimball Johnson mailto:kimball@bowerham.net
6 March 2015 11:23
Hi All.
Just an update on the new Laster Cutter.
It has been ordered and will arrive in a couple of months time (the
local UK distributor needed more stock from China). When it arrives
there is a bunch of work that will need to be done to it before it’s
ready, but Bob will keep you updated on that.
Thanks to everyone who has already paid their pledges, there is a few
that haven’t yet - please can you do so asap so we have the cash to
buy all the associated parts for the stretch goals.
Just a quick note to clear up some confusion with the Pledge/Laser
time deal. The current Laser cutter does not belong to HacMan, but to
Gobotics Limited, and all the money for the usage goes to Gobotics,
this means that the laster time you get from your pledge can only be
used for the new cutter, not the existing cutter.
Thanks all, and thanks for the generous pledging that has allowed us
to get a great new piece of equipment.
Kimball, your friendly Treasurer.
Kind regards,
tamarisk.
—
tamarisk@tamarisk.it
07949 151 100
I did a search and i couldn’t find anything in this group about where to make a pledge. Can someone make a link here?
http://wiki.hacman.org.uk/Pledges/Frikkin_LaserOn 17 March 2015 at 21:32, Disco Stu prisoner849@gmail.com wrote:
I did a search and i couldn’t find anything in this group about where to
make a pledge. Can someone make a link here?
–
You received this message because you are subscribed to the Google Groups
"Hackspace Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman.
For more options, visit https://groups.google.com/d/optout.
PLEDGE Frikkin Laser (the thread is lower down)
http://wiki.hacman.org.uk/Pledges/Frikkin_LaserOn Tuesday, 17 March 2015 21:33:50 UTC, Disco Stu wrote:
I did a search and i couldn’t find anything in this group about where to
make a pledge. Can someone make a link here?