Ladies and Gentle hackers…
Unfortunately the mendlemax 3rd printer is not working and is labelled out
order. Please do not touch until it’s not labelled…
Cheers
Alex
Hi All,
I’m going to get the mendelmax up and running again tonight.
I plan on rebuilding a lot of it over the next month, which may cause a
couple of week’s downtime. This will hopefully improve reliability and
print quality.
The Mendel90 is just about ready for general use, but will need a quick 10
minute configuration & training session before using it as the machine
config is a little different, and there are a few gotchas. It also has
some fragile areas I’d rather people didn’t break 
Ta,
BobOn 21 January 2014 18:06, Alexander Lang alexanderlang1980@gmail.comwrote:
Ladies and Gentle hackers…
Unfortunately the mendlemax 3rd printer is not working and is labelled out
order. Please do not touch until it’s not labelled…Cheers
Alex
–
You received this message because you are subscribed to the Google Groups
"Hackspace Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman.
For more options, visit https://groups.google.com/groups/opt_out.
MendelMax is completely boned, The electronics are done for.
I’ve bought a replacement main board, but that’ll take a couple of weeks to
arrive. During that time I’ll be rebuilding the Max and making all the
planned tweaks and improvements to it.
http://wiki.hacman.org.uk/RepRap_MendelMax/Early_2014_Upgrades for more
deets.
Will post to the list once it’s up and running. It anyone wants to chuck me
a fiver towards parts (should only be about 30 quid total) that’d be nice
Ta
BobOn 22 Jan 2014 11:10, “Bob Clough” parag0n@ivixor.net wrote:
Hi All,
I’m going to get the mendelmax up and running again tonight.
I plan on rebuilding a lot of it over the next month, which may cause a
couple of week’s downtime. This will hopefully improve reliability and
print quality.The Mendel90 is just about ready for general use, but will need a quick 10
minute configuration & training session before using it as the machine
config is a little different, and there are a few gotchas. It also has
some fragile areas I’d rather people didn’t breakTa,
BobOn 21 January 2014 18:06, Alexander Lang alexanderlang1980@gmail.comwrote:
Ladies and Gentle hackers…
Unfortunately the mendlemax 3rd printer is not working and is labelled
out order. Please do not touch until it’s not labelled…Cheers
Alex
–
You received this message because you are subscribed to the Google Groups
"Hackspace Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman.
For more options, visit https://groups.google.com/groups/opt_out.
I’ve had a dig at home and found a RAMPS board (different reprap mainboard
i’d bought for another printer). Hopefully this means I should be able to
get the printer up and running again at the weekend :)On 23 January 2014 00:12, Bob Clough parag0n@ivixor.net wrote:
MendelMax is completely boned, The electronics are done for.
I’ve bought a replacement main board, but that’ll take a couple of weeks
to arrive. During that time I’ll be rebuilding the Max and making all the
planned tweaks and improvements to it.
http://wiki.hacman.org.uk/RepRap_MendelMax/Early_2014_Upgrades for more
deets.Will post to the list once it’s up and running. It anyone wants to chuck
me a fiver towards parts (should only be about 30 quid total) that’d be
niceTa
Bob
On 22 Jan 2014 11:10, “Bob Clough” parag0n@ivixor.net wrote:Hi All,
I’m going to get the mendelmax up and running again tonight.
I plan on rebuilding a lot of it over the next month, which may cause a
couple of week’s downtime. This will hopefully improve reliability and
print quality.The Mendel90 is just about ready for general use, but will need a quick
10 minute configuration & training session before using it as the machine
config is a little different, and there are a few gotchas. It also has
some fragile areas I’d rather people didn’t breakTa,
BobOn 21 January 2014 18:06, Alexander Lang alexanderlang1980@gmail.comwrote:
Ladies and Gentle hackers…
Unfortunately the mendlemax 3rd printer is not working and is labelled
out order. Please do not touch until it’s not labelled…Cheers
Alex
–
You received this message because you are subscribed to the Google
Groups “Hackspace Manchester” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman.
For more options, visit https://groups.google.com/groups/opt_out.
Nice…well done!
Cheers BobOn 23 Jan 2014 09:07, “Bob Clough” parag0n@ivixor.net wrote:
I’ve had a dig at home and found a RAMPS board (different reprap mainboard
i’d bought for another printer). Hopefully this means I should be able to
get the printer up and running again at the weekendOn 23 January 2014 00:12, Bob Clough parag0n@ivixor.net wrote:
MendelMax is completely boned, The electronics are done for.
I’ve bought a replacement main board, but that’ll take a couple of weeks
to arrive. During that time I’ll be rebuilding the Max and making all the
planned tweaks and improvements to it.
http://wiki.hacman.org.uk/RepRap_MendelMax/Early_2014_Upgrades for more
deets.Will post to the list once it’s up and running. It anyone wants to chuck
me a fiver towards parts (should only be about 30 quid total) that’d be
niceTa
Bob
On 22 Jan 2014 11:10, “Bob Clough” parag0n@ivixor.net wrote:Hi All,
I’m going to get the mendelmax up and running again tonight.
I plan on rebuilding a lot of it over the next month, which may cause a
couple of week’s downtime. This will hopefully improve reliability and
print quality.The Mendel90 is just about ready for general use, but will need a quick
10 minute configuration & training session before using it as the machine
config is a little different, and there are a few gotchas. It also has
some fragile areas I’d rather people didn’t breakTa,
BobOn 21 January 2014 18:06, Alexander Lang alexanderlang1980@gmail.comwrote:
Ladies and Gentle hackers…
Unfortunately the mendlemax 3rd printer is not working and is labelled
out order. Please do not touch until it’s not labelled…Cheers
Alex
–
You received this message because you are subscribed to the Google
Groups “Hackspace Manchester” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman.
For more options, visit https://groups.google.com/groups/opt_out.–
You received this message because you are subscribed to the Google Groups
"Hackspace Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman.
For more options, visit https://groups.google.com/groups/opt_out.