MMMF

Google Groups
1

Sorry I’ve not been in for ages (other obligations), but I need to know
what’s happening regarding MMMF.
Do I just rock up (when + where) with the thing, or do I take it to MadLab
before hand, and take it down with everything else.
Also, I’m assuming it would be better if I PAT tested it, but do I need to
do anything else (PL insurance ??) or bring anything else (Label thing ??)
I can probably be there for the 2 days, but I will need to be there for set
up and pack away.

Sorry, but I’m a newb at makerfaires and have no idea what to do or expect.

Help Please :slight_smile:
George

(for the record it still isn’t finished, but it will be, and yes, the back
of it is an even bigger green-wire-bird’s-nest)

2

Hi George,

I am filling in a risk assessment for our mmmf stuff, so i’ll need to know
about any possible hazards (high voltages, sharp edges etc), there will be
a PAT tester there on the day to actually test things.

The easiest way to actually get stuff there would be to bring it to madlab
on the wednesday, and we can take it across with all the other stuff on
friday night. Warn us about any weaknesses so we don’t break it!

On Friday, setup is 11am to 10pm. I cant make it till friday evening, dont
know if anyone else is free that day to start the setup.
On Saturday, setup is from 7am to 10am, doors open at 10am, close at 5pm,
everyone out by 6pm.
On Sunday, we can get in 9am, doors are 10am till 5pm, teardown is 5pm to
7pm.

Ta,
BobOn 13 July 2012 18:47, DaShroom66 dashroom66@googlemail.com wrote:

Sorry I’ve not been in for ages (other obligations), but I need to know
what’s happening regarding MMMF.
Do I just rock up (when + where) with the thing, or do I take it to MadLab
before hand, and take it down with everything else.
Also, I’m assuming it would be better if I PAT tested it, but do I need to
do anything else (PL insurance ??) or bring anything else (Label thing ??)
I can probably be there for the 2 days, but I will need to be there for
set up and pack away.

Sorry, but I’m a newb at makerfaires and have no idea what to do or expect.

Help Please :slight_smile:
George

(for the record it still isn’t finished, but it will be, and yes, the back
of it is an even bigger green-wire-bird’s-nest)

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To view this discussion on the web, visit
https://groups.google.com/d/msg/hacman/-/5a6yf8bmSfgJ.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

3

I can’t think of anything remotely dangerous on this, but for the purpose
of filling out the shitty form, go with tripping over the T-bar stands. I
won’t be able to bring it on wednesday (though I will be going, it really
isn’t bus-able), but if you can give me vague directions as to where to put
it, I think my Dad can bring it up there on Friday in his van. I can do
more or less anything on Friday (or whenever) for setup. Also, it ain’t
small; think etch-a-sketch but about a meter wider, and then with laptop on
table, and I might bring the smaller one as well. If you want this (or
anything else) PAT testing before the event, I think I have a tester
somewhere, and could do my stuff, and bring it on wednesday or friday.

Cheers,
GeorgeOn 16 July 2012 17:01, Bob Clough parag0n@ivixor.net wrote:

Hi George,

I am filling in a risk assessment for our mmmf stuff, so i’ll need to know
about any possible hazards (high voltages, sharp edges etc), there will be
a PAT tester there on the day to actually test things.

The easiest way to actually get stuff there would be to bring it to madlab
on the wednesday, and we can take it across with all the other stuff on
friday night. Warn us about any weaknesses so we don’t break it!

On Friday, setup is 11am to 10pm. I cant make it till friday evening,
dont know if anyone else is free that day to start the setup.
On Saturday, setup is from 7am to 10am, doors open at 10am, close at 5pm,
everyone out by 6pm.
On Sunday, we can get in 9am, doors are 10am till 5pm, teardown is 5pm to
7pm.

Ta,
Bob

On 13 July 2012 18:47, DaShroom66 dashroom66@googlemail.com wrote:

Sorry I’ve not been in for ages (other obligations), but I need to know
what’s happening regarding MMMF.
Do I just rock up (when + where) with the thing, or do I take it to
MadLab before hand, and take it down with everything else.
Also, I’m assuming it would be better if I PAT tested it, but do I need
to do anything else (PL insurance ??) or bring anything else (Label thing
??)
I can probably be there for the 2 days, but I will need to be there for
set up and pack away.

Sorry, but I’m a newb at makerfaires and have no idea what to do or
expect.

Help Please :slight_smile:
George

(for the record it still isn’t finished, but it will be, and yes, the
back of it is an even bigger green-wire-bird’s-nest)

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To view this discussion on the web, visit
https://groups.google.com/d/msg/hacman/-/5a6yf8bmSfgJ.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

4

Would it fit on the floor under the project a sketch?On 16 July 2012 17:37, George Ainscough dashroom66@googlemail.com wrote:

I can’t think of anything remotely dangerous on this, but for the purpose
of filling out the shitty form, go with tripping over the T-bar stands. I
won’t be able to bring it on wednesday (though I will be going, it really
isn’t bus-able), but if you can give me vague directions as to where to put
it, I think my Dad can bring it up there on Friday in his van. I can do
more or less anything on Friday (or whenever) for setup. Also, it ain’t
small; think etch-a-sketch but about a meter wider, and then with laptop on
table, and I might bring the smaller one as well. If you want this (or
anything else) PAT testing before the event, I think I have a tester
somewhere, and could do my stuff, and bring it on wednesday or friday.

Cheers,
George

On 16 July 2012 17:01, Bob Clough parag0n@ivixor.net wrote:

Hi George,

I am filling in a risk assessment for our mmmf stuff, so i’ll need to
know about any possible hazards (high voltages, sharp edges etc), there
will be a PAT tester there on the day to actually test things.

The easiest way to actually get stuff there would be to bring it to
madlab on the wednesday, and we can take it across with all the other stuff
on friday night. Warn us about any weaknesses so we don’t break it!

On Friday, setup is 11am to 10pm. I cant make it till friday evening,
dont know if anyone else is free that day to start the setup.
On Saturday, setup is from 7am to 10am, doors open at 10am, close at 5pm,
everyone out by 6pm.
On Sunday, we can get in 9am, doors are 10am till 5pm, teardown is 5pm
to 7pm.

Ta,
Bob

On 13 July 2012 18:47, DaShroom66 dashroom66@googlemail.com wrote:

Sorry I’ve not been in for ages (other obligations), but I need to know
what’s happening regarding MMMF.
Do I just rock up (when + where) with the thing, or do I take it to
MadLab before hand, and take it down with everything else.
Also, I’m assuming it would be better if I PAT tested it, but do I need
to do anything else (PL insurance ??) or bring anything else (Label thing
??)
I can probably be there for the 2 days, but I will need to be there for
set up and pack away.

Sorry, but I’m a newb at makerfaires and have no idea what to do or
expect.

Help Please :slight_smile:
George

(for the record it still isn’t finished, but it will be, and yes, the
back of it is an even bigger green-wire-bird’s-nest)

–
You received this message because you are subscribed to the Google
Groups “HAC:Manchester” group.
To view this discussion on the web, visit
https://groups.google.com/d/msg/hacman/-/5a6yf8bmSfgJ.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

5

Not really, has a big stand, and is wider. But it is flat (has no need for
a projector behind it), so could go right at the backOn 16 July 2012 17:40, Bob Clough parag0n@ivixor.net wrote:

Would it fit on the floor under the project a sketch?

On 16 July 2012 17:37, George Ainscough dashroom66@googlemail.com wrote:

I can’t think of anything remotely dangerous on this, but for the purpose
of filling out the shitty form, go with tripping over the T-bar stands. I
won’t be able to bring it on wednesday (though I will be going, it really
isn’t bus-able), but if you can give me vague directions as to where to put
it, I think my Dad can bring it up there on Friday in his van. I can do
more or less anything on Friday (or whenever) for setup. Also, it ain’t
small; think etch-a-sketch but about a meter wider, and then with laptop on
table, and I might bring the smaller one as well. If you want this (or
anything else) PAT testing before the event, I think I have a tester
somewhere, and could do my stuff, and bring it on wednesday or friday.

Cheers,
George

On 16 July 2012 17:01, Bob Clough parag0n@ivixor.net wrote:

Hi George,

I am filling in a risk assessment for our mmmf stuff, so i’ll need to
know about any possible hazards (high voltages, sharp edges etc), there
will be a PAT tester there on the day to actually test things.

The easiest way to actually get stuff there would be to bring it to
madlab on the wednesday, and we can take it across with all the other stuff
on friday night. Warn us about any weaknesses so we don’t break it!

On Friday, setup is 11am to 10pm. I cant make it till friday evening,
dont know if anyone else is free that day to start the setup.
On Saturday, setup is from 7am to 10am, doors open at 10am, close at
5pm, everyone out by 6pm.
On Sunday, we can get in 9am, doors are 10am till 5pm, teardown is 5pm
to 7pm.

Ta,
Bob

On 13 July 2012 18:47, DaShroom66 dashroom66@googlemail.com wrote:

Sorry I’ve not been in for ages (other obligations), but I need to know
what’s happening regarding MMMF.
Do I just rock up (when + where) with the thing, or do I take it to
MadLab before hand, and take it down with everything else.
Also, I’m assuming it would be better if I PAT tested it, but do I need
to do anything else (PL insurance ??) or bring anything else (Label thing
??)
I can probably be there for the 2 days, but I will need to be there for
set up and pack away.

Sorry, but I’m a newb at makerfaires and have no idea what to do or
expect.

Help Please :slight_smile:
George

(for the record it still isn’t finished, but it will be, and yes, the
back of it is an even bigger green-wire-bird’s-nest)

–
You received this message because you are subscribed to the Google
Groups “HAC:Manchester” group.
To view this discussion on the web, visit
https://groups.google.com/d/msg/hacman/-/5a6yf8bmSfgJ.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups “HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.