Does anyone mind if I take Mr Bubbles to my house so I can have a go
at cleaning it out properly and maybe fixing it up?
Ta,
Bob
(Mr Bubbles is the old etch tank for those who are unclear)On 19 December 2012 12:35, Bob Clough parag0n@ivixor.net wrote:
Does anyone mind if I take Mr Bubbles to my house so I can have a go
at cleaning it out properly and maybe fixing it up?Ta,
Bob
I don’t mind, how big is the hole and could it be repaired with some new
material glued over it?On 19 December 2012 12:35, Bob Clough parag0n@ivixor.net wrote:
Does anyone mind if I take Mr Bubbles to my house so I can have a go
at cleaning it out properly and maybe fixing it up?Ta,
Bob–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
Ben Dooks, http://www.fluff.org/ben/ bjdooks@googlemail.com
its the gland where the bubbler enters the tank. I’m planning on
replacing just the gland if I can, but need to properly clean the
thing first.On 20 December 2012 15:55, Ben Dooks bjdooks@googlemail.com wrote:
I don’t mind, how big is the hole and could it be repaired with some new
material glued over it?On 19 December 2012 12:35, Bob Clough parag0n@ivixor.net wrote:
Does anyone mind if I take Mr Bubbles to my house so I can have a go
at cleaning it out properly and maybe fixing it up?Ta,
Bob–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
Ben Dooks, http://www.fluff.org/ben/ bjdooks@googlemail.com–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
Mr Bubbles is hereby officially fixed! He’s been sat around for a week
full of water, including 3 days solid turned on with no leaks I can see.
Does anyone want to buy some etchant for him? We need 5-6 Litres, the
cheapest I can find is from rapid:
Total including VAT and Delivery is £25.
Ta,
BobOn 20 December 2012 16:08, Bob Clough parag0n@ivixor.net wrote:
its the gland where the bubbler enters the tank. I’m planning on
replacing just the gland if I can, but need to properly clean the
thing first.On 20 December 2012 15:55, Ben Dooks bjdooks@googlemail.com wrote:
I don’t mind, how big is the hole and could it be repaired with some new
material glued over it?On 19 December 2012 12:35, Bob Clough parag0n@ivixor.net wrote:
Does anyone mind if I take Mr Bubbles to my house so I can have a go
at cleaning it out properly and maybe fixing it up?Ta,
Bob–
You received this message because you are subscribed to the Google
Groups“HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
Ben Dooks, http://www.fluff.org/ben/ bjdooks@googlemail.com–
You received this message because you are subscribed to the Google Groups
“HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
I’ll put in a tenner, can we also look at neutraliser. To be honest I would like to try a hydrochloric hydrogen peroxide etchant if we can find someone to sell us high 4M JFK 
----- Reply message -----From: “Bob Clough” parag0n@ivixor.net
To: hacman@googlegroups.com
Subject: [HACMan] Mr Bubbles
Date: Thu, Jan 31, 2013 17:02
Mr Bubbles is hereby officially fixed! He’s been sat around for a week full of water, including 3 days solid turned on with no leaks I can see.
Does anyone want to buy some etchant for him? We need 5-6 Litres, the cheapest I can find is from rapid:
Total including VAT and Delivery is £25.
Ta,
Bob
its the gland where the bubbler enters the tank. I’m planning on
replacing just the gland if I can, but need to properly clean the
thing first.
I will put in a fiver. Also there may be other bits we could get from rapid
to get to free delivery.On Jan 31, 2013 5:02 PM, “Bob Clough” parag0n@ivixor.net wrote:
Mr Bubbles is hereby officially fixed! He’s been sat around for a week
full of water, including 3 days solid turned on with no leaks I can see.Does anyone want to buy some etchant for him? We need 5-6 Litres, the
cheapest I can find is from rapid:Total including VAT and Delivery is £25.
Ta,
BobOn 20 December 2012 16:08, Bob Clough parag0n@ivixor.net wrote:
its the gland where the bubbler enters the tank. I’m planning on
replacing just the gland if I can, but need to properly clean the
thing first.On 20 December 2012 15:55, Ben Dooks bjdooks@googlemail.com wrote:
I don’t mind, how big is the hole and could it be repaired with some new
material glued over it?On 19 December 2012 12:35, Bob Clough parag0n@ivixor.net wrote:
Does anyone mind if I take Mr Bubbles to my house so I can have a go
at cleaning it out properly and maybe fixing it up?Ta,
Bob–
You received this message because you are subscribed to the Google
Groups“HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
Ben Dooks, http://www.fluff.org/ben/ bjdooks@googlemail.com–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.
http://www.ebay.co.uk/sch/i.html?_trksid=p5197.m570.l1313&_nkw=hydrochloric+acid&_sacat=0&_from=R40
36% is about 12M according to the internet, so we’d dilute it 1:3 to get 4M
Also WTF, you can buy 12M hydrochloric on ebay!On 31 January 2013 17:06, Alexander Lang alexanderlang1980@gmail.comwrote:
I’ll put in a tenner, can we also look at neutraliser. To be honest I
would like to try a hydrochloric hydrogen peroxide etchant if we can find
someone to sell us high 4M JFKSent from my HTC
----- Reply message -----
From: “Bob Clough” parag0n@ivixor.net
To: hacman@googlegroups.com
Subject: [HACMan] Mr Bubbles
Date: Thu, Jan 31, 2013 17:02Mr Bubbles is hereby officially fixed! He’s been sat around for a week
full of water, including 3 days solid turned on with no leaks I can see.Does anyone want to buy some etchant for him? We need 5-6 Litres, the
cheapest I can find is from rapid:Total including VAT and Delivery is £25.
Ta,
BobOn 20 December 2012 16:08, Bob Clough parag0n@ivixor.net wrote:
its the gland where the bubbler enters the tank. I’m planning on
replacing just the gland if I can, but need to properly clean the
thing first.On 20 December 2012 15:55, Ben Dooks bjdooks@googlemail.com wrote:
I don’t mind, how big is the hole and could it be repaired with some new
material glued over it?On 19 December 2012 12:35, Bob Clough parag0n@ivixor.net wrote:
Does anyone mind if I take Mr Bubbles to my house so I can have a go
at cleaning it out properly and maybe fixing it up?Ta,
Bob–
You received this message because you are subscribed to the Google
Groups“HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
Ben Dooks, http://www.fluff.org/ben/ bjdooks@googlemail.com–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.
according to the internet (specifically
http://electronics.stackexchange.com/questions/5540/ferric-chloride-or-muriatic-acid-hydrogen-peroxide-for-etching)
the shelf life on Hydrochloric+peroxide is crap, in the vicinity of 2 weeks.On 1 February 2013 09:30, Bob Clough parag0n@ivixor.net wrote:
http://www.ebay.co.uk/sch/i.html?_trksid=p5197.m570.l1313&_nkw=hydrochloric+acid&_sacat=0&_from=R40
36% is about 12M according to the internet, so we’d dilute it 1:3 to get 4M
Also WTF, you can buy 12M hydrochloric on ebay!
On 31 January 2013 17:06, Alexander Lang alexanderlang1980@gmail.comwrote:
I’ll put in a tenner, can we also look at neutraliser. To be honest I
would like to try a hydrochloric hydrogen peroxide etchant if we can find
someone to sell us high 4M JFKSent from my HTC
----- Reply message -----
From: “Bob Clough” parag0n@ivixor.net
To: hacman@googlegroups.com
Subject: [HACMan] Mr Bubbles
Date: Thu, Jan 31, 2013 17:02Mr Bubbles is hereby officially fixed! He’s been sat around for a week
full of water, including 3 days solid turned on with no leaks I can see.Does anyone want to buy some etchant for him? We need 5-6 Litres, the
cheapest I can find is from rapid:Total including VAT and Delivery is £25.
Ta,
BobOn 20 December 2012 16:08, Bob Clough parag0n@ivixor.net wrote:
its the gland where the bubbler enters the tank. I’m planning on
replacing just the gland if I can, but need to properly clean the
thing first.On 20 December 2012 15:55, Ben Dooks bjdooks@googlemail.com wrote:
I don’t mind, how big is the hole and could it be repaired with some
new
material glued over it?On 19 December 2012 12:35, Bob Clough parag0n@ivixor.net wrote:
Does anyone mind if I take Mr Bubbles to my house so I can have a go
at cleaning it out properly and maybe fixing it up?Ta,
Bob–
You received this message because you are subscribed to the Google
Groups“HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
Ben Dooks, http://www.fluff.org/ben/ bjdooks@googlemail.com–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.
You can get 10M HCl from hardware stores. May be labelled ‘spirits of
salt’. It’s plenty strong enough for making cupric chloride.
I did try just HCl and H202 once … I dropped the PCB in, the bath
foamed up, and 5 seconds later I had a completely clean piece of
fibreglass. Fast is good, but not that fast :).On Fri, Feb 1, 2013 at 9:30 AM, Bob Clough parag0n@ivixor.net wrote:
http://www.ebay.co.uk/sch/i.html?_trksid=p5197.m570.l1313&_nkw=hydrochloric+acid&_sacat=0&_from=R40
36% is about 12M according to the internet, so we’d dilute it 1:3 to get 4M
Also WTF, you can buy 12M hydrochloric on ebay!
On 31 January 2013 17:06, Alexander Lang alexanderlang1980@gmail.com wrote:
I’ll put in a tenner, can we also look at neutraliser. To be honest I
would like to try a hydrochloric hydrogen peroxide etchant if we can find
someone to sell us high 4M JFKSent from my HTC
----- Reply message -----
From: “Bob Clough” parag0n@ivixor.net
To: hacman@googlegroups.com
Subject: [HACMan] Mr Bubbles
Date: Thu, Jan 31, 2013 17:02Mr Bubbles is hereby officially fixed! He’s been sat around for a week
full of water, including 3 days solid turned on with no leaks I can see.Does anyone want to buy some etchant for him? We need 5-6 Litres, the
cheapest I can find is from rapid:Total including VAT and Delivery is £25.
Ta,
BobOn 20 December 2012 16:08, Bob Clough parag0n@ivixor.net wrote:
its the gland where the bubbler enters the tank. I’m planning on
replacing just the gland if I can, but need to properly clean the
thing first.On 20 December 2012 15:55, Ben Dooks bjdooks@googlemail.com wrote:
I don’t mind, how big is the hole and could it be repaired with some
new
material glued over it?On 19 December 2012 12:35, Bob Clough parag0n@ivixor.net wrote:
Does anyone mind if I take Mr Bubbles to my house so I can have a go
at cleaning it out properly and maybe fixing it up?Ta,
Bob–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
Ben Dooks, http://www.fluff.org/ben/ bjdooks@googlemail.com–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.
Reminds me of the slurry we had last time when we were trying to neutralise
the etchant. Was well funny. Looked like somone had a
serious case of diarrhea.On 1 February 2013 09:39, Adrian Godwin artgodwin@gmail.com wrote:
You can get 10M HCl from hardware stores. May be labelled ‘spirits of
salt’. It’s plenty strong enough for making cupric chloride.I did try just HCl and H202 once … I dropped the PCB in, the bath
foamed up, and 5 seconds later I had a completely clean piece of
fibreglass. Fast is good, but not that fast :).On Fri, Feb 1, 2013 at 9:30 AM, Bob Clough parag0n@ivixor.net wrote:
http://www.ebay.co.uk/sch/i.html?_trksid=p5197.m570.l1313&_nkw=hydrochloric+acid&_sacat=0&_from=R40
36% is about 12M according to the internet, so we’d dilute it 1:3 to get
4MAlso WTF, you can buy 12M hydrochloric on ebay!
On 31 January 2013 17:06, Alexander Lang alexanderlang1980@gmail.com wrote:
I’ll put in a tenner, can we also look at neutraliser. To be honest I
would like to try a hydrochloric hydrogen peroxide etchant if we can
findsomeone to sell us high 4M JFK
Sent from my HTC
----- Reply message -----
From: “Bob Clough” parag0n@ivixor.net
To: hacman@googlegroups.com
Subject: [HACMan] Mr Bubbles
Date: Thu, Jan 31, 2013 17:02Mr Bubbles is hereby officially fixed! He’s been sat around for a week
full of water, including 3 days solid turned on with no leaks I can see.Does anyone want to buy some etchant for him? We need 5-6 Litres, the
cheapest I can find is from rapid:Total including VAT and Delivery is £25.
Ta,
BobOn 20 December 2012 16:08, Bob Clough parag0n@ivixor.net wrote:
its the gland where the bubbler enters the tank. I’m planning on
replacing just the gland if I can, but need to properly clean the
thing first.On 20 December 2012 15:55, Ben Dooks bjdooks@googlemail.com wrote:
I don’t mind, how big is the hole and could it be repaired with some
new
material glued over it?On 19 December 2012 12:35, Bob Clough parag0n@ivixor.net wrote:
Does anyone mind if I take Mr Bubbles to my house so I can have a go
at cleaning it out properly and maybe fixing it up?Ta,
Bob–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
Ben Dooks, http://www.fluff.org/ben/ bjdooks@googlemail.com–
You received this message because you are subscribed to the Google
Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
You received this message because you are subscribed to the Google
Groups“HAC:Manchester” group.
To unsubscribe from this group and stop receiving emails from it, send
anemail to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.–
You received this message because you are subscribed to the Google
Groups“HAC:Manchester” group.
To unsubscribe from this group and stop receiving emails from it, send
anemail to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to hacman+unsubscribe@googlegroups.com.
To post to this group, send an email to hacman@googlegroups.com.
Visit this group at http://groups.google.com/group/hacman?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.