PCB Manufacturers

Google Groups
1

Thought this might be handy to post here too. if anyone has any other pcb
suppliers, please post them!---------- Forwarded message ----------
From: Bob Clough parag0n@ivixor.net
Date: 22 November 2011 11:25
Subject: PCB Manufacturers
To: micromouse@cs.rhul.ac.uk

Some PCB Manufacturers for small runs of micromouse boards as discussed at
RoboTIC

Seeedstudios Fusion
10 boards at $9.99 the lot (for up to 5cm x 5cm) or $25 the lot (for up to
10cm x 10cm). + $4 shipping
Has options for thickness etc.
Will route slots and funny shapes.
Takes 14-21 days from order to delivery (in my experience)
http://www.seeedstudio.com/depot/fusion-pcb-service-p-835.html?cPath=185

Stickleback (formerly Spirit)
1 square foot with as many of your PCBs as will fit for £35 + £15 shipping.
UK manufacturer.
Quoted as 10 working days from order to delivery
http://cgi.ebay.co.uk/270848990831

Dorkbot - Laen’s PCB Order
3 boards at $5/square inch + $15 shipping
US Manufacturer
Manufacture time is 9 days after the order deadline (Next order is 5th
December, so will ship on the 14th), Then it ships airmail, so another 5
days ish?
http://dorkbotpdx.org/wiki/pcb_order

Olimex
160100: €30 + €5.50
320200: €120 + €5.50
Manufacture time is 5 days, shipping time is a further 4 or 5 days
Will only cut to rectangle shapes.
http://www.olimex.com/pcb

I normally use Seeedstudios for my PCBs, because i’m a big fan of having
way too many spare boards for when I hook batteries in backwards and the
like. I can take a photo of some examples later on if anyone is interested.

-Bob

2

Excellent I have been looking around for this myself,

thanks Bob!On 1 December 2011 22:31, Bob Clough parag0n@ivixor.net wrote:

Thought this might be handy to post here too. if anyone has any other pcb
suppliers, please post them!

---------- Forwarded message ----------
From: Bob Clough parag0n@ivixor.net
Date: 22 November 2011 11:25
Subject: PCB Manufacturers
To: micromouse@cs.rhul.ac.uk

Some PCB Manufacturers for small runs of micromouse boards as discussed at
RoboTIC

Seeedstudios Fusion
10 boards at $9.99 the lot (for up to 5cm x 5cm) or $25 the lot (for up to
10cm x 10cm). + $4 shipping
Has options for thickness etc.
Will route slots and funny shapes.
Takes 14-21 days from order to delivery (in my experience)
http://www.seeedstudio.com/depot/fusion-pcb-service-p-835.html?cPath=185

Stickleback (formerly Spirit)
1 square foot with as many of your PCBs as will fit for £35 + £15 shipping.
UK manufacturer.
Quoted as 10 working days from order to delivery
http://cgi.ebay.co.uk/270848990831

Dorkbot - Laen’s PCB Order
3 boards at $5/square inch + $15 shipping
US Manufacturer
Manufacture time is 9 days after the order deadline (Next order is 5th
December, so will ship on the 14th), Then it ships airmail, so another 5
days ish?
http://dorkbotpdx.org/wiki/pcb_order

Olimex
160100: €30 + €5.50
320200: €120 + €5.50
Manufacture time is 5 days, shipping time is a further 4 or 5 days
Will only cut to rectangle shapes.
http://www.olimex.com/pcb

I normally use Seeedstudios for my PCBs, because i’m a big fan of having way
too many spare boards for when I hook batteries in backwards and the like.
I can take a photo of some examples later on if anyone is interested.

-Bob

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

3

have added this info to the Wiki

http://wiki.hacman.org.uk/PCB_ManufacturersOn 2 December 2011 09:50, Alexander Lang alexanderlang1980@googlemail.com wrote:

Excellent I have been looking around for this myself,

thanks Bob!

On 1 December 2011 22:31, Bob Clough parag0n@ivixor.net wrote:

Thought this might be handy to post here too. if anyone has any other pcb
suppliers, please post them!

---------- Forwarded message ----------
From: Bob Clough parag0n@ivixor.net
Date: 22 November 2011 11:25
Subject: PCB Manufacturers
To: micromouse@cs.rhul.ac.uk

Some PCB Manufacturers for small runs of micromouse boards as discussed at
RoboTIC

Seeedstudios Fusion
10 boards at $9.99 the lot (for up to 5cm x 5cm) or $25 the lot (for up to
10cm x 10cm). + $4 shipping
Has options for thickness etc.
Will route slots and funny shapes.
Takes 14-21 days from order to delivery (in my experience)
http://www.seeedstudio.com/depot/fusion-pcb-service-p-835.html?cPath=185

Stickleback (formerly Spirit)
1 square foot with as many of your PCBs as will fit for £35 + £15 shipping.
UK manufacturer.
Quoted as 10 working days from order to delivery
http://cgi.ebay.co.uk/270848990831

Dorkbot - Laen’s PCB Order
3 boards at $5/square inch + $15 shipping
US Manufacturer
Manufacture time is 9 days after the order deadline (Next order is 5th
December, so will ship on the 14th), Then it ships airmail, so another 5
days ish?
http://dorkbotpdx.org/wiki/pcb_order

Olimex
160100: €30 + €5.50
320200: €120 + €5.50
Manufacture time is 5 days, shipping time is a further 4 or 5 days
Will only cut to rectangle shapes.
http://www.olimex.com/pcb

I normally use Seeedstudios for my PCBs, because i’m a big fan of having way
too many spare boards for when I hook batteries in backwards and the like.
I can take a photo of some examples later on if anyone is interested.

-Bob

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google Groups “HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to hacman+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/hacman?hl=en-GB.

Thomas C. Bloor Mob: (+44) 07905646892
tom.bloor@googlemail.com or tom@bloorfamily.net
Homepage: http://tom.bloorfamily.net

4

Nice work Tom.

I’ll try and prepare another page for how to prepare PCBs for manufacture
(from eagle) some time.

-BobOn 2 December 2011 10:05, Tom Bloor tom.bloor@googlemail.com wrote:

have added this info to the Wiki

http://wiki.hacman.org.uk/PCB_Manufacturers

On 2 December 2011 09:50, Alexander Lang alexanderlang1980@googlemail.com wrote:

Excellent I have been looking around for this myself,

thanks Bob!

On 1 December 2011 22:31, Bob Clough parag0n@ivixor.net wrote:

Thought this might be handy to post here too. if anyone has any other
pcb

suppliers, please post them!

---------- Forwarded message ----------
From: Bob Clough parag0n@ivixor.net
Date: 22 November 2011 11:25
Subject: PCB Manufacturers
To: micromouse@cs.rhul.ac.uk

Some PCB Manufacturers for small runs of micromouse boards as discussed
at

RoboTIC

Seeedstudios Fusion
10 boards at $9.99 the lot (for up to 5cm x 5cm) or $25 the lot (for up
to

10cm x 10cm). + $4 shipping
Has options for thickness etc.
Will route slots and funny shapes.
Takes 14-21 days from order to delivery (in my experience)

http://www.seeedstudio.com/depot/fusion-pcb-service-p-835.html?cPath=185

Stickleback (formerly Spirit)
1 square foot with as many of your PCBs as will fit for £35 + £15
shipping.

UK manufacturer.
Quoted as 10 working days from order to delivery
http://cgi.ebay.co.uk/270848990831

Dorkbot - Laen’s PCB Order
3 boards at $5/square inch + $15 shipping
US Manufacturer
Manufacture time is 9 days after the order deadline (Next order is 5th
December, so will ship on the 14th), Then it ships airmail, so another 5
days ish?
http://dorkbotpdx.org/wiki/pcb_order

Olimex
160100: €30 + €5.50
320200: €120 + €5.50
Manufacture time is 5 days, shipping time is a further 4 or 5 days
Will only cut to rectangle shapes.
http://www.olimex.com/pcb

I normally use Seeedstudios for my PCBs, because i’m a big fan of
having way

too many spare boards for when I hook batteries in backwards and the
like.

I can take a photo of some examples later on if anyone is interested.

-Bob

–
You received this message because you are subscribed to the Google
Groups

“HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
You received this message because you are subscribed to the Google
Groups “HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.

–
Thomas C. Bloor Mob: (+44) 07905646892
tom.bloor@googlemail.com or tom@bloorfamily.net
Homepage: http://tom.bloorfamily.net

–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.