I’ve replaced the broken part on the reprap hotend, and its still barely
extruding, so its probably time to call the cheap hotend a failed
experiment and buy a proper one.
The best hotend for repraps currently is the J-head Mk V - BV, which cost
about £45 to buy. If we upgrade the mendelmax to use this, we should be
able to bump up the print speed and quality.
I pledge £10 towards it.
We’ll also put £10 in.
tas and Skippy
07949 151 100
Boats, bikes and business administration. I’m rarely where you expect me to
be.On Jan 21, 2013 12:34 PM, “Bob Clough” parag0n@ivixor.net wrote:
I’ve replaced the broken part on the reprap hotend, and its still barely
extruding, so its probably time to call the cheap hotend a failed
experiment and buy a proper one.The best hotend for repraps currently is the J-head Mk V - BV, which cost
about £45 to buy. If we upgrade the mendelmax to use this, we should be
able to bump up the print speed and quality.I pledge £10 towards it.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
I’ll add a tenner in to the pot!
Cheers
AlexOn 21 January 2013 12:44, tamarisk kay tamarisk.kay@gmail.com wrote:
We’ll also put £10 in.
tas and Skippy
–
07949 151 100
Boats, bikes and business administration. I’m rarely where you expect me
to be.
On Jan 21, 2013 12:34 PM, “Bob Clough” parag0n@ivixor.net wrote:I’ve replaced the broken part on the reprap hotend, and its still barely
extruding, so its probably time to call the cheap hotend a failed
experiment and buy a proper one.The best hotend for repraps currently is the J-head Mk V - BV, which cost
about £45 to buy. If we upgrade the mendelmax to use this, we should be
able to bump up the print speed and quality.I pledge £10 towards it.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
And I a fiverOn Jan 21, 2013 12:51 PM, “Alexander Lang” alexanderlang1980@gmail.com wrote:
I’ll add a tenner in to the pot!
Cheers
Alex
On 21 January 2013 12:44, tamarisk kay tamarisk.kay@gmail.com wrote:
We’ll also put £10 in.
tas and Skippy
–
07949 151 100
Boats, bikes and business administration. I’m rarely where you expect me
to be.
On Jan 21, 2013 12:34 PM, “Bob Clough” parag0n@ivixor.net wrote:I’ve replaced the broken part on the reprap hotend, and its still barely
extruding, so its probably time to call the cheap hotend a failed
experiment and buy a proper one.The best hotend for repraps currently is the J-head Mk V - BV, which
cost about £45 to buy. If we upgrade the mendelmax to use this, we should
be able to bump up the print speed and quality.I pledge £10 towards it.
–
You received this message because you are subscribed to the Google
Groups “HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.
Have a gander in my box.
You can borrow mine if you need to print at the second
Regards
Skippy
Philip McGaw
Philip McGaw
07969 502 077 | Philip@JustVigilantes.co.uk | http://philipmcgaw.com | http://JustVigilantes.co.uk
Twitter: http://twitter.com/JustVigilantes | LinkedIn: http://www.linkedin.com/in/philipmcgaw
READ CAREFULLY. By reading this email, you agree, on behalf of your employer, to release me from all obligations and waivers arising from any and all NON-NEGOTIATED agreements, licenses, terms-of-service, shrinkwrap, clickwrap, browsewrap, confidentiality, non-disclosure, non-compete and acceptable use policies (“BOGUS AGREEMENTS”) that I have entered into with your employer, its partners, licensors, agents and assigns, in perpetuity, without prejudice to my ongoing rights and privileges. You further represent that you have the authority to release me from any BOGUS AGREEMENTS on behalf of your employer.On 21 Jan 2013, at 12:34, Bob Clough parag0n@ivixor.net wrote:
I’ve replaced the broken part on the reprap hotend, and its still barely extruding, so its probably time to call the cheap hotend a failed experiment and buy a proper one.
The best hotend for repraps currently is the J-head Mk V - BV, which cost about £45 to buy. If we upgrade the mendelmax to use this, we should be able to bump up the print speed and quality.
I pledge £10 towards it.
You received this message because you are subscribed to the Google Groups “HAC:Manchester” group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to hacman+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/hacman?hl=en-GB.
Are we short the 10 quid still? If so count me in.
BazOn Jan 21, 2013 1:46 PM, “Philip McGaw” Philip@mcgaw.eu wrote:
Have a gander in my box.
You can borrow mine if you need to print at the second
Regards
Skippy
Philip McGaw
Philip McGaw
07969 502 077 | Philip@JustVigilantes.co.uk | http://philipmcgaw.com |
http://JustVigilantes.co.uk
Twitter: http://twitter.com/JustVigilantes | LinkedIn:
http://www.linkedin.com/in/philipmcgawREAD CAREFULLY. By reading this email, you agree, on behalf of your
employer, to release me from all obligations and waivers arising from any
and all NON-NEGOTIATED agreements, licenses, terms-of-service, shrinkwrap,
clickwrap, browsewrap, confidentiality, non-disclosure, non-compete and
acceptable use policies (“BOGUS AGREEMENTS”) that I have entered into with
your employer, its partners, licensors, agents and assigns, in perpetuity,
without prejudice to my ongoing rights and privileges. You further
represent that you have the authority to release me from any BOGUS
AGREEMENTS on behalf of your employer.On 21 Jan 2013, at 12:34, Bob Clough parag0n@ivixor.net wrote:
I’ve replaced the broken part on the reprap hotend, and its still barely
extruding, so its probably time to call the cheap hotend a failed
experiment and buy a proper one.The best hotend for repraps currently is the J-head Mk V - BV, which cost
about £45 to buy. If we upgrade the mendelmax to use this, we should be
able to bump up the print speed and quality.I pledge £10 towards it.
–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.–
You received this message because you are subscribed to the Google Groups
"HAC:Manchester" group.
To post to this group, send an email to hacman@googlegroups.com.
To unsubscribe from this group, send email to
hacman+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/hacman?hl=en-GB.